Alfredo Martínez García

Alfredo Martínez García

Metalurgia e Integridad Estructural •
+52 (614) 439 alfredo.martinez@cimav.edu.mx Chihuahua, Chih.

Educación

Posdoctorado

Centro de Investigación en Materiales Avanzados (2025)

Postdoctorado

Universidad del Papaloapan, campus Tuxtepec (2022)

Doctor en Ciencias en Desarrollo Regional y Tecnológico

Tecnológico Nacional de México / Instituto Tecnológico de Oaxaca (2020)

Maestro en Ciencias Químicas

Universidad del Papaloapan campus Tuxtepec (2014)

Ingeniero Químico

Instituto Tecnológico de Oaxaca (2011)

Áreas de Interés

  • Línea de investigación: Generación de nuevos materiales con aplicación potencial en la producción de energía, almacenamiento de energía y cuidado del medio ambiente.
  • Modificación estructural de carbohidratos poliméricos para la producción de biocombustibles.
  • Síntesis de aleaciones base Al y aleaciones de alta entropía con superiores propiedades mecánicas.
  • Síntesis y caracterización estructural de aleaciones de alta entropía con estructura tipo BCC como electrodos para baterías tipo M-MH.
  • Síntesis y caracterización estructural de aleaciones de alta entropía con estructura tipo BCC para el almacenamiento de hidrógeno.

Últimas publicaciones

  • Study of Nanohardness and Scratch in a CoCrFeMnNiAl HEA Consolidated by High-Frequency-Induction Hea

    L. Baylon-García, J.M. Mendoza-Duarte, M.A. Ruiz-Esparza-Rodríguez, I. Estrada-Guel, R. Martínez-Sanchez, P.A. Guerrero-Seanez, A. Hurtado-Macías, A. Martinez-Garcia, S. Gonzalez, E.A. Juarez-Arellano, C.G. Garay-Reyes
    MATERIALS LETTERS, Vol.404. No.. pp139673 (2026)
  • Thermal insulation and compressive strength of lightweight geopolymer foam concrete exposed to accelerated weathering by carbonation, salt fog and UV light

    G abriela A. de la Rosa Corral 1 R amón Corral Higuera 2 , Paola Arredondo Rea 2 , Andrés Castro Beltrán 2 , Anabel 5 D e la Cruz Delgado 1 , A lfredo Martinez Garcia 1 and Víctor M. Orozco Carmona 1
    MATERIALS, Vol.19. No.12. pp1-13 (2025)
  • Microstructural Evolution and Mechanical Behavior of Al-Cu-Mg Alloy with Li and Graphite Additions Processed via High-Energy Ball Milling and Consolidated by High Induction

    J.M. Mendoza-Duarte, I. Estrada-Guel, P.A. Guerrero-Seañez, J.C. Guía-Tello, A. Martínez-García, E.A. Juárez-Arellano, C.G. Garay-Reyes, R. Martínez-Sánchez
    MATERIALS TODAY COMMUNICATIONS, Vol.49. No.114159. pp (2025)
  • Synergistic Effects of Sub-Micron WC Reinforcement and T6 Heat Treatment on the Evolution of Microstructure and Mechanical Behavior in Al–Cu–Mg Composites Fabricated Through

    Gustavo Rodríguez-Cabriales, Juan Pablo Flores-De los Ríos, Juan Francisco López de Lara-Herrera, Mario Sánchez-Carrillo, Hansel Manuel Medrano Prieto, Jose Manuel Mendoza-Duarte, Marco Antonio Ruiz-Esparza-Rodríguez, Carlos Gamaliel Garay-Reyes, Sergio González, Alfredo Martínez-García, Ivanovich Estrada-Guel, Roberto Martínez-Sánchez
    METALS, Vol.15. No.11. pp1216 (2025)
  • Cooling rate control combined with refractory Mo and/or V addition to enhance the mechanical properties of CoCrFeMnNi alloy

    S. González, C.G. Garay-Reyes, A. Martínez-García, Konda Gokuldoss Prashanth, M.A. Ruiz-Esparza-Rodríguez, A. Hurtado-Macías, J. Eckert, R. Martínez-Sánchez
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, Vol.36. No.. pp459-469 (2025)
  • Geomimetic approaches in the design and synthesis of ordered L10-type structure platinum-based noble high entropy alloys at low temperature

    Garcia-Mendoza Teresa, Winkler Björn, Morgenroth Wolfgang, Barkov Andrei, Martinez-Garcia Alfredo, Garay-Reyes Carlos, Chiñas-Castillo Fernando, Juarez-Arellano Erick.
    INORGANIC CHEMISTRY, Vol.64. No.19. pp8174–8184 (2025)
  • Mechanical properties of two novel non-equiatomic Zr-Hf-Ti-Cu-Ni-Co-Al High Entropy Alloys with high glass forming ability

    S. González, S. Wurster, C.G. Garay-Reyes, A. Hurtado-Macías, P. Ramasamy, D. Oleszak, C. Gammer, K.G. Prashanth, A Martínez-García, J. Eckert, R. Martínez-Sánchez
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol.1024. No. 180196 . pp (2025)
  • Relationship between Microstructure and Wear Behaviour in A356 Alloy and A356/Al2O3 and A356/WC Composites After Casting and Hot-Extrusion

    P.A. Guerrero-Seañez, C.G. Garay-Reyes, L.D. Laguna-Zubia, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, A. Martínez-García, J.L. Hernández-Rivera, J.J. Cruz-Rivera, R. Martínez-Sánchez
    METALS AND MATERIALS INTERNATIONAL, Vol.31. No.. pp742–751 (2025)
  • High energy ball milling as a novel method to mecanolyze raw material for bio-H2 production by dark fermentations of Escherichia coli

    A. Martinez-Garcia, R. M. Velazquez-Vargas, E. A. Juarez-Arellano, C. G. Garay-Reyes, L. Perez-Picaso, O. Viñas-Bravo, A. K. Navarro-Mtz.
    ENERGY CONVERSION AND MANAGEMENT, Vol.325. No.. pp119405 (2025)
  • Mechanosynthesis, characterization, and cytotoxic evaluation of soft ferromagnetic non-equiatomic high entropy alloys in the system Al10+xM12-xFe35Mn23Ni20 (M = Cr, Mo; x = 0, 0.2

    T García-Mendoza, JB Martinez Enriquez, D Ordaz Rosado, J Zamora, MA Peña-Rico, AK Navarro-Mtz, A Cruz-Nolasco, A Martinez-Garcia, CG Garay-Reyes, G Vásquez-Victorio, AJ Cortés-López, F Chiñas Castillo, E A Juarez-Arellano.
    MATERIALS CHEMISTRY AND PHYSICS, Vol.337. No.. pp130615 (2025)
  • Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment

    L.J. García-Hernández, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, K.A. García-Aguirre, I. Estrada-Guel, S. González, J.M. Mendoza-Duarte, J. Camarillo-Cisneros, J.C. Guía-Tello, A. Martinez-Garcia, R. Martínez-Sánchez
    CANADIAN METALLURGICAL QUARTERLY, Vol.64. No.3. pp853-862 (2025)
  • Enhancement of the Electrical Conductivity and Mechanical Properties of Al-Mg-Si and Al-Mg-Zn Ternary Systems After a T8 Heat Treatment

    X. Atanacio-Sánchez, C. G. Garay-Reyes, A. Martínez-García, I. Estrada-Guel, J. M. Mendoza Duarte, P. Guerrero-Seañez, S. González, Enrique Rocha-Rangel, J. J. Cruz-Rivera, E. J. Gutiérrez-Castañeda, R. Martínez-Sánchez
    METALS, Vol.14. No.11. pp1286 (2024)
  • Synthesis and Electrochemical Properties of Oleylamine as a Sour Saline Corrosion Inhibitor Under Laminar Flow at 40 ◦C

    Jorge Alvarez-Malpica, Karime Carrera-Gutiérrez, Manuel Chinchillas-Chinchillas, Manuel Herrera Zaldivar, Alfredo Martinez-Garcia, Victor M. Orozco-Carmona
    Materials, Vol.17. No.5284. pp1-12 (2024)
  • Solid acids as cocatalysts in the chelation-assisted hydroacylation of alkenes and alkynes

    Blanca I Vergara-Arenas, Eréndira García-Ríos, Rubén Gaviño, Jorge Cárdenas, Alfredo Martinez-Garcia, Erick A Juarez-Arellano, Adolfo López-Torres, José A Morales-Serna
    RSC ADVANCES, Vol.14. No.. pp31675-31682 (2024)
  • Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte

    A. Martinez-Garcia, Víctor M. Orozco-Carmona, J.M. Mendoza-Duarte, E.A. Juárez-Arellano, S. González, M.A. Ruíz-Esparza-Rodríguez, I. Estrada-Guel, C. G. Garay-Reyes, R. Martínez Sánchez
    ELECTROCHIMICA ACTA, Vol.497. No.. pp144601 (2024)
  • Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

    L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
    VACUUM, Vol.222. No.. pp113006 (2024)
  • Structural analysis of potato starch transformation during high-energy ball-milling: Oxygen and humidity content effects

    A Martinez-Garcia, L Fink, L Bayarjargal, B Winkler, EA Juarez-Arellano, AK Navarro-Mtz
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, Vol.260. No.2. pp129579 (2024)
  • Aluminum Carbide Formation in Al-Graphite Composites: In Situ Study and Effects of Processing Variables and Sintering Method

    J.M. Mendoza-Duarte, I. Estrada-Guel, J. E. García-Herrera, R. Pérez-Bustamante, H. Arcos-Gutiérrez, A. Martínez-García, X. Atanacio Sánchez, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
    MATERIALS TODAY COMMUNICATIONS, Vol.28. No.. pp108396 (2024)
  • Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

    A. Martinez-Garcia, I. Estrada-Guel, E. Reguera, R. Amaro-Hernandez, S. González, C. G. Garay-Reyes, R. Martínez-Sánchez
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.50. No.. pp670-684 (2024)
  • Parametrization of the mechanically induced self-propagating high-temperature synthesis (MI-SHS) of Ti5Si3

    Erick A Juarez-Arellano, Alfredo Martinez-Garcia, Bjoern Winkler, Tezozomoc Perez-Lopez, Juan Manuel Padilla
    CERAMICS INTERNATIONAL, Vol.49. No.2. pp2350-2358 (2023)
  • Mechanosynthesis of β-Cr2N using BN as the Nitrogen Source

    A Martinez-Garcia, AK Navarro-Mtz, E Lopez-Vazquez, M Valera-Zaragoza, EA Juarez-Arellano
    SCIENCE OF SINTERING, Vol.54. No.3. pp305-319 (2022)