<?= $datos->nombre ?>

Carlos Domínguez Ríos

METALURGIA E INTEGRIDAD ESTRUCTURAL • INVESTIGADOR TITULAR B • SNI I
+52 (614) 439 1117 carlos.dominguez@cimav.edu.mx Chihuahua, Chih.

Educación

Cimav

Doctorado en Ciencia de Materiales (2002)

Áreas de Interés

  • Recubrimientos electroless
  • Metalurgia Física
  • Cerámicos

Últimas publicaciones

  • Sintering of carbon nanotube-reinforced zirconia-toughened alumina composites prepared by uniaxial pressing and cold isostatic pressing

    A Reyes-Rojas, C Dominguez-Rios, A Garcia-Reyes, A Aguilar-Elguezabal and M H Bocanegra-Bernal
    Materials Research Express F.I. = 1.151, Vol.5. No.10. pp105602 (2018)
  • Enhancement of Corrosion Resistance of NiCrFeBSi Coatings Obtained by Flame Thermal Spray Process Adding an Electroless Nickel Coating Ni-P

    Arturo Barba-Pingarrón, Raúl Valdez-Navarro, Félix Sánchez-De Jesus, Ana María Bolarín-Miró, Rafael González-Parra, Alba Covelo-Villar, Miguel Ángel Hernández-Gallegos, Carlos Domínguez-Ríos
    Journal of Surface Engineered Materials and Advanced Technology,
  • Effect of low-content of carbon nanotubes on the fracture toughness and hardness of carbon nanotube reinforced alumina prepared by sinter, HIP and sinter+HIP routes.

    M.H. Bocanegra-Bernal, C. Dominguez-Rios, J. Echeberria, A. Reyes-Rojas, A. Garcia-Reyes, A. Aguilar-Elguezabal
    Materials Research Express F.I. = 1.06, Vol.4. No.8. pp085004 (2017)
  • Electroless Ni-B coating onto TiH2 powder: An approach for a simplified surface preparation

    M. Romero-Romero, C. Domínguez-Ríos, R. Torres-Sánchez, A. Aguilar-Elguezabal
    Surface & Coatings Technology F.I. = 2.13,
  • Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics

    M.H. Bocanegra-Bernal, C. Dominguez-Rios, J. Echeberria, A. Reyes-Rojas, A. Garcia-Reyes, A. Aguilar-Elguezabal
    Ceramics International F.I = 2.76,
  • Influence of the Isothermally Heated TiH2 Used as Foaming Agent on Properties of Aluminum Alloy A356 Foams

    M. Romero-Romero, C. Domínguez-Ríos, R. Torres-Sánchez, and A. Aguilar-Elguezabal
    Science of Advanced Materials F.I. = 1.8,
  • Spark plasma sintering of Multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: is it justifiable the effort to reinforce them?

    M.H. Bocanegra-Bernal, C. Domínguez-Ríos, J. Echeberría, A. Reyes-Rojas, A. García-Reyes, A. Aguilar-Elguézabal
    Ceramics International , Vol.42. No.1. pp2054-2062 (2016)
  • Microstructure and transmission electron microscopy characterization of electroless Ni??B thin films deposited on MWCNTs

    Claudia A. García-Aguirre Carlos Domínguez-Ríos, Roal Torres-Sánchez Manuel Román-Aguirre, José T. Holguín-Momaca Alfredo Aguilar-Elguézabal
    Surface & Coatings Technology,
  • Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: A novel way to delay hydrothermal degradation Ceramics International

    Mehdi Estili, J. Echeberria, J. Vleugels, K. Vanmeensel, Oleksandr B. Bondarchuk, N. Rodríguez, L. Larrimbe, A. Reyes-Rojas, A. Garcia-Reyes, C. Domínguez-Rios, M.H. Bocanegra-Bernal, A. Aguilar-Elguezabal
    Ceramics International, Vol.41. No.3. pp4569-4580 (2015)

Reconocimientos y Distinciones

  • Diploma

    Dirección General de Estudios Superiores Tecnologica
  • Reconocimiento Por Haber Impartido la Conferencia "Cualidades del Investigador"

    Instituto Tecnologíco de Chihuahua