<?= $datos->nombre ?>

Carlos Gamaliel Garay Reyes

METALURGIA E INTEGRIDAD ESTRUCTURAL • TECNICO TITULAR C • SNI I
+52 (614) 439 9999 carlos.garay@cimav.edu.mx Chihuahua, Chih.

Educación

Universidad Autónoma de San Luis Potosí

Doctor en Ingeniería y Ciencia de Materiales (2013)

Áreas de Interés

  • Metalurgia Convencional
  • Materiales Compuestos de Matriz Metálica
  • Aleaciones Base Aluminio
  • Aleaciones Base Níquel
  • Transformaciones de Fases

Últimas publicaciones

  • Exfoliated graphite preparation based on an eco-friendly mechanochemical route

    J.M. Mendoza-Duarte, F.C. Robles-Hernández, C.D. Gomez-Esparza, J.G. Miranda-Hernández, C.G. Garay-Reyes, I. Estrada-Guel, R. Martínez-Sánchez
    Journal of Environmental Chemical Engineering, Vol.8. No.5. pp104370 (2020)
  • Effect of Ni additions and hot deformation on precipitation behavior and hardness in Al-Si-Mg aged alloys

    H.M. Medrano-Prieto, C.G. Garay-Reyes, I. Estrada-Guel, J.M. Mendoza-Duarte, J.C. Guía-Tello, R.A. Ochoa-Gamboa, C.E. Ornelas-Gutierrez, G. Rodríguez-Cabriales, J.S. Castro-Carmona, H. Camacho-Montes, M.C. Maldonado-Orozco, R. Martínez-Sanchez
    Journal of Alloys and Compounds,
  • Aluminum-Lithium alloy prepared by a solid-state route applying an alternative fast sintering route based on induction heating

    J.M. Mendoza-Duarte, M. Sagarnaga-Fernandez, E.G. Moreno-Resendiz, H.M. Medrano-Prieto, I. Estrada-Guel, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
    Materials Letters,
  • Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

    G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera, J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
    Materials Today Communications,
  • Influence of plastic deformation and Cu/Mg weight ratio on strengthening mechanisms and precipitation behavior of AA2024 aluminum alloys.

    J. L. García-Hernández, C.G. Garay-Reyes, I. K. Gómez-Barraza, M. A. Ruiz- Esparza-Rodríguez, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, M. C. Maldonado-Orozco and R. Martínez-Sánchez.
    Journal of Materials Research and Technology, Vol.8. No.6. pp5471 (2019)
  • Effect of Fe Impurities and Pure Cr Additions on Microstructure of Nanostructured WC-10Co Alloy Sintered by HIP

    C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, I. Estrada Guel, S. E. Hernández-Martínez, J.L. Hernández-Rivera, J.J. Cruz-Rivera, J. S. Castro-Carmona, H. M. Medrano-Prieto, J.M. Silva-Aceves, H. Camacho-Montes, Quirino Estrada, R. Martínez-Sánchez.
    Journal Alloys and Compounds,
  • Microstructural development and mechanical properties during hot rolling and annealing of an automotive steel combining TRIP/TWIP effects.

    E.D. Palma- Elvira, P. Garnica-González, J.S. Pacheco-Cedeño, J.J. Cruz Rivera, M. Ramos-Azpeitia, C.G. Garay-Reyes, J.L. Hernández-Rivera.
    Journal Alloys and Compounds., Vol.798. No.798. pp45 (2019)
  • Experimental and Numerical Analyses of the Consolidation Process of AA 7075??2 wt.% ZrO2 Powders by Equal Channel Angular Pressing

    S.E. Hernández-Martínez, J.J. Cruz-Rivera, C.G. Garay-Reyes, and J.L. Hernández-Rivera.
    Journal of Materials Engineering and Performance, Vol.28. No.1. pp154 (2019)
  • EVALUATION OF THE NANOSTRAIN CAUSED BY INCOHERENT PARTICLES IN AN ALUMINUM??BASED COMPOSITE

    J. L. Hernández-Rivera, M. Ramos-Azpeitia, J. J. Cruz Rivera, J. Palmerin Moreno, C. G. Garay-Reyes
    Acta Microscopica, Vol.27. No.1. pp29 (2018)
  • Electromechanical-Metallurgical Probe Contact Wear Effects of PdCuAg Alloy in Cycling Contact With SAC 305 Solder: Semiconductor Test and Ball Grid Array Packaging

    R. Martinez Sanchez, C. G. Garay, R. Islam, and J. Aguilar Santillan
    Transactions on Components, Packaging and Manufacturing Technology, Vol.8. No.5. pp896 (2018)
  • Comparative study of Oswald Ripening and Trans-Interface Diffusion-Controlled theory models: Coarsening of y' precipitates affected by elastic strain along a concentration gradient

    C.G. Garay-Reyes, S. E. Hernández-Martínez, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. J. Gutiérrez-Castañeda, H. J. Dorantes-Rosales, J. Aguilar-Santillán, R. Martínez-Sánchez.
    Metals and Materials International, Vol.23. No.2. pp298 (2017)
  • Evaluation of hardness and precipitation in Zn-modified Al2024 alloy after plastic deformation and heat treatments

    C.G. Garay-Reyes, L. González-Rodelas, E. Cuadros-Lugo, E. Martínez-Franco, J. Aguilar-Santillan, I.Estrada-Guel, M.C. Maldonado-Orozco and R. Martínez-Sánchez
    Journal of Alloys and Compounds,
  • Evolution of Microstructure in Al-Si-Cu System Modified with a Transition Element Addition and its Effect on Hardness

    Hansel Manuel Medrano-Prieto, Carlos Gamaliel Garay-Reyes, Cynthia Deisy Gómez-Esparza, Joaquín Aguilar-Santillán, María Cristina Maldonado-Orozco, Roberto Martínez-Sánchez
    Materials Research, Vol.19. No.supp. 1. pp59-66 (2017)
  • Effect of Nickel addition and solution treatment time on microstructure and hardness of Al-Si-Cu aged alloys

    H.M. Medrano-Prieto, C.G. Garay-Reyes, C.D. Gómez-Esparza, I. Estrada-Guel, J. Aguilar-Santillan, M.C. Maldonado-Orozco, R. Martínez-Sánchez
    Materials Characterization,