José Manuel Mendoza Duarte

Educación

Postdoctorado

Centro de Tecnología Avanzada (CIATEQ) (2022)

Postdoctorado

Centro de Investigación de Materiales Avanzados, S. C (CIMAV) (2024)

Doctorado en Ciencia de Materiales.

Centro de Investigación de Materiales Avanzados, S. C (CIMAV) (2020)

Maestro en Ciencia de Materiales

Centro de Investigación de Materiales Avanzados, S. C (CIMAV) (2014)

Ingeniero Químico.

Tecnológico Nacional (TECNM) (2012)

Técnico en Máquinas de Combustión Interna

Centro de Bachillerato Técnico y de Servicios No. 122 (CBTis 122) (2005)

Áreas de Interés

• Aleaciones Metálicas Avanzadas
• Grafito expandido
• Materiales compuestos de matriz metalica
• Metalurgia de Polvos
• Metalurgia Física
• Sinterización de Polvos

Últimas publicaciones

• Study of Nanohardness and Scratch in a CoCrFeMnNiAl HEA Consolidated by High-Frequency-Induction Hea

  L. Baylon-García, J.M. Mendoza-Duarte, M.A. Ruiz-Esparza-Rodríguez, I. Estrada-Guel, R. Martínez-Sanchez, P.A. Guerrero-Seanez, A. Hurtado-Macías, A. Martinez-Garcia, S. Gonzalez, E.A. Juarez-Arellano, C.G. Garay-Reyes
  MATERIALS LETTERS, Vol.404. No.. pp139673 (2026)

• Microstructural Evolution and Mechanical Behavior of Al-Cu-Mg Alloy with Li and Graphite Additions Processed via High-Energy Ball Milling and Consolidated by High Induction

  J.M. Mendoza-Duarte, I. Estrada-Guel, P.A. Guerrero-Seañez, J.C. Guía-Tello, A. Martínez-García, E.A. Juárez-Arellano, C.G. Garay-Reyes, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.49. No.114159. pp (2025)

• Synergistic Effects of Sub-Micron WC Reinforcement and T6 Heat Treatment on the Evolution of Microstructure and Mechanical Behavior in Al–Cu–Mg Composites Fabricated Through

  Gustavo Rodríguez-Cabriales, Juan Pablo Flores-De los Ríos, Juan Francisco López de Lara-Herrera, Mario Sánchez-Carrillo, Hansel Manuel Medrano Prieto, Jose Manuel Mendoza-Duarte, Marco Antonio Ruiz-Esparza-Rodríguez, Carlos Gamaliel Garay-Reyes, Sergio González, Alfredo Martínez-García, Ivanovich Estrada-Guel, Roberto Martínez-Sánchez
  METALS, Vol.15. No.11. pp1216 (2025)

• Relationship between Microstructure and Wear Behaviour in A356 Alloy and A356/Al2O3 and A356/WC Composites After Casting and Hot-Extrusion

  P.A. Guerrero-Seañez, C.G. Garay-Reyes, L.D. Laguna-Zubia, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, A. Martínez-García, J.L. Hernández-Rivera, J.J. Cruz-Rivera, R. Martínez-Sánchez
  METALS AND MATERIALS INTERNATIONAL, Vol.31. No.. pp742–751 (2025)

• Enhancement of the Electrical Conductivity and Mechanical Properties of Al-Mg-Si and Al-Mg-Zn Ternary Systems After a T8 Heat Treatment

  X. Atanacio-Sánchez, C. G. Garay-Reyes, A. Martínez-García, I. Estrada-Guel, J. M. Mendoza Duarte, P. Guerrero-Seañez, S. González, Enrique Rocha-Rangel, J. J. Cruz-Rivera, E. J. Gutiérrez-Castañeda, R. Martínez-Sánchez
  METALS, Vol.14. No.11. pp1286 (2024)

• Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte

  A. Martinez-Garcia, Víctor M. Orozco-Carmona, J.M. Mendoza-Duarte, E.A. Juárez-Arellano, S. González, M.A. Ruíz-Esparza-Rodríguez, I. Estrada-Guel, C. G. Garay-Reyes, R. Martínez Sánchez
  ELECTROCHIMICA ACTA, Vol.497. No.. pp144601 (2024)

• Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment

  L. J. García-Hernández, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodríguez, K. A. García-Aguirre, I. Estrada-Guel, S. González, J. M. Mendoza-Duarte, J. Camarillo-Cisneros, J. C. Guía-Tello, A. Martinez-Garcia & R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.64. No.3. pp853–862 (2024)

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Aluminum Carbide Formation in Al-Graphite Composites: In Situ Study and Effects of Processing Variables and Sintering Method

  J.M. Mendoza-Duarte, I. Estrada-Guel, J. E. García-Herrera, R. Pérez-Bustamante, H. Arcos-Gutiérrez, A. Martínez-García, X. Atanacio Sánchez, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.28. No.. pp108396 (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza- Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981–989 (2023)

• Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components

  R.E. Villarreal-Loya, C.G. Garay-Reyes, J.M. Mendoza-Duarte, J.L. Hernández-Rivera, J.J. Cruz-Rivera, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS LETTERS, Vol.343. No.. pp134342 (2023)