Marco Antonio Ruiz Esparza Rodríguez

Educación

Áreas de Interés

Últimas publicaciones

• Relationship Between Structure/Microstructure and Hardness of CrMnFeCoNiX0.5 High-Entropy Alloys with Refractory Metals X = V and Mo Obtained by Mechanical Alloying

  Alfredo Martinez Garcia, Sergio González, José Manuel Mendoza Duarte, Cynthia Deisy Gómez Esparza, Marco Antonio Ruiz Esparza Rodríguez, Abel Hurtado Macías, Erick Adrián Juarez Arellano, Emmanuel José Gutiérrez Castañeda, Xóchitl Atanacio Sánchez, Carlos Gamaliel Garay Reyes*, and Roberto Martínez Sánchez*
  COATINGS, Vol.16. No.4. pp1-17 (2026)

• Hexagonal-to-Monoclinic Phase–Modulated HAp Nanofibers via Low-Temperature Hydrothermal Synthesis for Enhanced Piezoelectric and Biocompatible Performance

  K. Carrera-Gutiérrez, E. Venegas-Contreras, M. Márquez-Torres, M.A. Ruiz-Esparza-Rodríguez, Y. Esqueda-Barrón, R. Gomez-Batres, I. Leal-Berumen, J.N. Díaz de León, J.J Gervacio-Arciniega, G. Herrera-Pérez, V.M. Orozco-Carmona and G. Rojas-George
  BIOMOLECULES, Vol.16. No.385. pp1-22 (2026)

• Study of nanohardness and scratch in a CoCrFeMnNiAl HEA consolidated by high-frequency-induction heat

  L. Baylon-García , J.M. Mendoza-Duarte, I. Estrada-Guel, P.A. Guerrero-Seanez, M.A. Ruiz-Esparza-Rodríguez, R. Martínez-Sanchez, A. Hurtado-Macías, A. Martinez-Garcia, S. Gonzalez, E.A. Juarez-Arellano, C.G. Garay-Reyes.
  MATERIALS LETTERS, Vol.404. No.139613. pp4 (2026)

• Synergistic Effects of Sub-Micron WC Reinforcement and T6 Heat Treatment on the Evolution of Microstructure and Mechanical Behavior in Al–Cu–Mg Composites Fabricated Through

  Gustavo Rodríguez-Cabriales, Juan Pablo Flores-De los Ríos, Juan Francisco López de Lara-Herrera, Mario Sánchez-Carrillo, Hansel Manuel Medrano Prieto, Jose Manuel Mendoza-Duarte, Marco Antonio Ruiz-Esparza-Rodríguez, Carlos Gamaliel Garay-Reyes, Sergio González, Alfredo Martínez-García, Ivanovich Estrada-Guel, Roberto Martínez-Sánchez
  METALS, Vol.15. No.11. pp1216 (2025)

• Cooling rate control combined with refractory Mo and/or V addition to enhance the mechanical properties of CoCrFeMnNi alloy

  S. González, C.G. Garay-Reyes, A. Martínez-García, Konda Gokuldoss Prashanth, M.A. Ruiz-Esparza-Rodríguez, A. Hurtado-Macías, J. Eckert, R. Martínez-Sánchez
  JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, Vol.36. No.. pp459-469 (2025)

• Structural Insights: In Situ Synthesis of Titanium Carbide by Magnesiothermic Method Using Carbon Nanotubes and Turbostratic Carbon as Carbon Sources

  María Luisa Camacho-Ríos, Guillermo Herrera-Pérez, Luis Carlos Rodriguez-Pacheco, Mariana Lizbeth Luján-Aguilar, Antonio Ramírez-de la Cruz, Nathaly Withney Aguilar-Cisneros, Marco Antonio Ruiz Esparza-Rodriguez, Daniel Lardizabal-Gutierrez, Raúl Pérez-Bustamante, José Antonio Betancourt-Cantera
  Journal of Composites Science, Vol.9. No.4. pp171 (2025)

• Relationship between Microstructure and Wear Behaviour in A356 Alloy and A356/Al2O3 and A356/WC Composites After Casting and Hot-Extrusion

  P.A. Guerrero-Seañez, C.G. Garay-Reyes, L.D. Laguna-Zubia, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, A. Martínez-García, J.L. Hernández-Rivera, J.J. Cruz-Rivera, R. Martínez-Sánchez
  METALS AND MATERIALS INTERNATIONAL, Vol.31. No.. pp742–751 (2025)

• Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment

  L.J. García-Hernández, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, K.A. García-Aguirre, I. Estrada-Guel, S. González, J.M. Mendoza-Duarte, J. Camarillo-Cisneros, J.C. Guía-Tello, A. Martinez-Garcia, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.64. No.3. pp853-862 (2025)

• Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte

  A. Martinez-Garcia, Víctor M. Orozco-Carmona, J.M. Mendoza-Duarte, E.A. Juárez-Arellano, S. González, M.A. Ruíz-Esparza-Rodríguez, I. Estrada-Guel, C. G. Garay-Reyes, R. Martínez Sánchez
  ELECTROCHIMICA ACTA, Vol.497. No.. pp144601 (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981-989 (2024)

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Ag Nanoparticle-Decorated SiO2-Al2O3-ZrO2 Composites as Low-Cost Substrate for Enhanced Signal Infrared Spectroscopy

  Jesús Alberto Garibay-Alvarado, M.A. Ruiz-Esparza-Rodríguez, E. Armando Zaragoza-Contreras, Simón Reyes-López
  ACS APPLIED NANO MATERIALS, Vol.Vol. 2024. No.7. ppPP 4658−4666 (2024)

• Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

  H. M. Medrano-Prieto, A. Santos-Beltrán, V. Gallegos-Orozco, M. M. Santos-Beltrán, H. Camacho-Montes, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodriguez, I. Estrada-Guel, G. Rodríguez-Cabriales, J. C. Guía-Tello, J. M. Mendoza-Duarte, J. M. Silva-Aceves, J. S. Castro-Carmona, R. Martínez-Sánchez
  Metallography, Microstructure, and Analysis, Vol.13. No.. pp181-187 (2024)

• Optimization of In Situ Formation of a Titanium Carbide Nanohybrid via Mechanical Alloying Using Stearic Acid and Carbon Nanotubes as Carbon Sources

  M.L. Camacho-Rios, G. Herrera-Perez, M. A. Ruiz-Esparza-Rodríguez, R. Pérez-Bustamante, J.E. García-Herrera, J.A. Betancourt-Cantera, D. Lardizábal-Gutiérrez
  Journal of Composites Science, Vol.7. No.12. pp502 (2023)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza- Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981–989 (2023)

• Abrasive Wear Behavior of Al-4Cu-1.5Mg-WC Composites Synthesized Through Powder Metallurgy

  G. Rodríguez-Cabriales, C.G. Garay-Reyes, J.C. Guía-Tello, H.M. Medrano Prieto, I. Estrada-Guel, L.J. García-Hernández, M.A Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, K.A. García-Aguirre, S. González, R. Martínez-Sánchez
  Lubricants, Vol.11. No.3. pp12 (2023)

• Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy

  J. C. Guía-Tello, C. G. Garay-Reyes, G. Rodríguez-Cabriales, H. M. Medrano-Prieto, M. A. Ruiz-Esparza-Rodríguez, L. J. García Hernández, J. M. Mendoza-Duarte, K. A. García-Aguirre, I. Estrada-Guel, S. González, R. Martínez-Sánchez
  JOURNAL OF MATERIALS SCIENCE, Vol.57. No.. pp2180–2193 (2022)